Can You Re Stucco Over Existing Stucco

Grind away high spots so that the wall is fairly even.

Can you re stucco over existing stucco. This material can even be applied over existing stucco to create a different texture or fresh look. Hollow spots can be located by. Check the existing stucco for structural integrity.

Pour the stucco compound into the reservoir of the stucco sprayer and apply the stucco evenly over the surface. This will prevent parts of the old. They insist that the only proper way to re stucco is to sandblast away the existing and replace it with new.

New stucco can be sprayed on existing stucco if a solid bond can be established. A ron webber owner of prime plastering in irvine calif responds. As a general rule no points on the existing wall should extend more than 1 4 inch past the shallowest voids in the stucco.

Concrete and brick surfaces usually only require two layers. The short answer here is of course you can anything is possible in the wonderful world of home exteriors. Most wooden surfaces require three layers of stucco to achieve appropriate thickness and texture.

Apply the second coat two days after the first coat is applied. If the existing wall is in good condition this job can be straightforward. Old loose or dirty stucco will not hold any type of stucco repair whether it is sprayed on or applied in any other manner.

But if the existing surface has imperfections the problems that caused the flaws must be repaired or else the problems will recur. Cracking can be identified with visual examination. Step 1 use an angle grinder to remove sharp edges or heavy points on the wall.